Lumber NewBoard feet, cost and cut list StairsStraight and U-shaped, 1:1 templates DrawersSizes, cut list and drilling Shelf SagShelf sag and load capacity Spacing / SlatsEven spacing and gaps Heat LossHeat loss and payback Smart Mix (2K)Ratios and amounts for 2K mixes
Plans with a 3D model Build-ready PDF and a 3D model in the browser. Browse plans →
The calculators are free. PRO unlocks dimensioned drawings, templates and the full PDF. What is PRO →
ČeštinaCZ EnglishEN DeutschDE PolskiPL FrançaisFR EspañolES
Calculators
LumberNew Stairs Drawers Shelf Sag Spacing / Slats Heat Loss Smart Mix (2K)
CalcWood PRO Support development
Terms of Service Privacy Policy
↑↓ selectEnter openEsc close

    BLACK FRIDAY 50% off your first 3 months of CalcWood PRO Ends in $29 $14.50 Get 50% off
    CalcWood Logo
    CALCWOOD.
    BASIC VERSION – FREE, NO REGISTRATION
    PRO PRO FEATURES ARE OPTIONAL AND PAID

    Board Foot Calculator

    Enter the parts you need. The calculator lays them out on store boards with as little waste as possible and tells you how many boards to buy and how to cut them.
    More than volume: a cut list with saw kerf, cost, waste and weight, so you know if you can haul it home.
    Projects calculated: 0
    Need help with the terms?
    Practical tips and quick search in the knowledge cards are waiting below.
    1. What do you need to cut? ?
    Each row is one size in millimetres. The name is optional, it shows up in the shopping list and PDF.
    2. Lumber you'll buy
    Lumber to buy ?
    With ripping the calculator suggests one board per thickness, as wide as the widest part; without it a board for every part section. Fill in the length and width your store sells. An edited row stays as it is. More lengths or widths = more rows.

    Just fill in the length your store sells.

    Offcuts you already have ?
    Enter the lumber pieces you already have at home or in the shop. The calculator cuts what it can from them and only then plans what to buy for the rest. Offcuts are not end trimmed, their ends count as square.

    Got offcuts at home? Add them and the calculator uses them before it tells you what to buy.

    3. Optional
    +
    Link copied!

    What the lumber calculator helps you with

    Tips from the shop for buying lumber

    Lumber is expensive and most of it gets wasted by a badly planned purchase. This is what works for me:

    The calculator offers your offcut PRO PROSave your offcuts in My wood. On every calculation the calculator checks them, and when one fits the parts you are cutting, it offers it with one click. You only buy what is missing.
    Log offcuts right after cuttingSave what is left with one button or by hand. Add a note, like “painted end, in the garage”, so you know where to find it.
    Not every scrap is an offcutSet the smallest useful offcut. Shorter pieces count as waste, so your shop does not fill up with scraps you will never use.
    Parts first, boards secondDo not buy by eye. List the finished parts, lay them out on boards and only then drive to the store. You save money and a second trip.
    Do not trust board endsEnds are often checked and out of square. I trim at least 3/8″ off each end, more with kiln-dried hardwood.
    Kerf adds upAn 1/8″ kerf looks like nothing. With ten parts from one board it is over an inch and suddenly a part does not fit.
    Waste depends on the woodSurfaced softwood is fine with 10–15 % waste. Rough hardwood with knots and checks can easily need 25–30 %.
    4/4 is not 1 inch finishedRough 4/4 hardwood planes down to about 13/16″. Need a full 1″? Buy 5/4. The calculator picks the rough thickness for you.
    A 2×4 is not 2 by 4Dimensional lumber is sold by nominal size. A 2×4 measures 1 1/2″ × 3 1/2″, but you pay board feet for 2″ × 4″.
    Use your own pricesLumber prices change every month and every store counts differently. That is why I never make up prices, you enter yours.
    Weight is an estimateI calculate weight at 12 % moisture content. Green lumber from a sawmill is much heavier, plan your hauling with that in mind.
    Longer boards often winA longer board often fits the parts better and leaves one usable offcut instead of two short scraps. Enter several lengths and compare.

    Shop tip: Before you head to the store, enter your finished parts and what the store sells. You get the exact board count and the offcuts.

    Frequently asked questions

    All questions on the FAQ page
    Can the calculator use the offcuts I already have?

    Yes. In step 2, enter the offcuts you have (count, thickness, width, length). The calculator cuts what it can from them and only then plans what to buy for the other parts. The shopping list, cut list and PDF all show what comes from offcuts and what you buy.

    How does the calculator know which offcut fits?

    With PRO, save your offcuts in My wood in My workshop. On every calculation the calculator checks them, and when some fit your parts it offers them with one click. After cutting, one button removes the used pieces and adds the new offcuts. Pieces shorter than the smallest useful offcut count as waste.

    Can I download the list to Excel and print part labels?

    Yes. Below the result there is Download Excel (parts, shopping list and cut list on separate sheets). With PRO you also get part labels for an A4 sheet of 24 labels 70 × 37 mm: each piece gets its number, name, size and the board it comes from.

    How many boards should I buy?

    List your finished parts. Add the saw kerf and end trim to each one. Then lay the parts out on the lengths your store sells, so every part sits whole on one board. The number of boards you end up with is what you buy. The calculator does this for you: enter the parts and the store lengths and you see the board count and the offcuts.

    Most board foot calculators only give you volume, and cut list optimizers want you to enter the boards yourself. This one starts from your finished parts and suggests how many boards to buy in store lengths and how to cut them, plus volume, cost and weight. The calculation is free, the shopping list and cut list are free for up to 10 different parts.

    What is a cut list?

    A list of which parts you cut from which board, and in what order. The calculator builds the cut list for you: for every board it shows the parts, the kerfs and the offcut, so in the shop you just measure and cut.

    How do I calculate board feet?

    Multiply thickness in inches × width in inches × length in feet and divide by 12. A 1″ × 6″ board 8 feet long is 1 × 6 × 8 / 12 = 4 board feet. The calculator above does it for your whole list and adds waste.

    How many board feet is a 2×4×8?

    5.33 board feet. Softwood stores count from the nominal size 2″ × 4″, even though the stud really measures 1 1/2″ × 3 1/2″.

    Why did the store charge more board feet than my parts?

    Hardwood is tallied before planing, thicknesses under 1″ count as 1″ and the area is rounded to whole square feet (NHLA rules). Open “Why did they charge you more?” under the results.

    How do I convert board feet to cubic meters?

    1 board foot = 0.002359737 m³ (144 cubic inches). Multiply board feet by 0.00236 to get cubic meters. The other way: 1 m³ ≈ 423.8 board feet.

    Board feetCubic meters
    10 BF0.024 m³
    50 BF0.118 m³
    100 BF0.236 m³
    How do I convert price per board foot to price per linear foot?

    Price per linear foot = price per board foot × thickness″ × width″ / 12. A 1×6 has 0.5 board feet per linear foot, so at $8 per board foot a linear foot costs $4. The other way, divide the linear foot price by that number. The calculator takes the price per board foot, per linear foot or per piece, enter it exactly as listed.

    How much does lumber weigh?

    It depends on the species. I use specific gravity at 12 % moisture content from the USDA Wood Handbook (FPL-GTR-282). Green lumber is much heavier.

    Specieslb per board footkg per m³
    White oak≈ 4.0 lb≈ 762 kg
    Red oak≈ 3.7 lb≈ 706 kg
    Hard maple≈ 3.7 lb≈ 706 kg
    White ash≈ 3.5 lb≈ 672 kg
    Black walnut≈ 3.2 lb≈ 616 kg
    Black cherry≈ 2.9 lb≈ 560 kg
    Yellow-poplar≈ 2.4 lb≈ 470 kg
    Southern yellow pine (loblolly)≈ 3.0 lb≈ 571 kg
    Douglas-fir (Coast)≈ 2.8 lb≈ 538 kg
    Western redcedar≈ 1.9 lb≈ 358 kg
    Does it make a sheet cut list?

    No, here I handle boards and beams lengthwise (one dimension). Cutting sheet goods is a separate topic.

    Does it calculate firewood or logs?

    No, this calculator is for sawn lumber: boards, beams and battens. Firewood is sold by the cord, which includes the air between the pieces, and log volume uses a different formula based on the log diameter.

    Ratings & Reviews

    Checking calculator ratings...
    Loading reviews...
    ✕

    Did the calculator help you?

    Your feedback helps improve CalcWood for all woodworkers and DIYers around the world.

    UPDATES & CHANGELOG
    +
    v1.10 (November 2026)
    • Offcuts from your shop: enter the offcuts you have at home, the calculator cuts what it can from them and you only buy what is missing. It offers your saved offcuts when they fit your parts.
    • My wood: your store lumber and offcuts at hand in My workshop, with a short note. After cutting, save the new offcuts with one click.
    • Smallest useful offcut: a shorter piece is waste, a longer one can be saved for the next project.
    • Whole board, no end trim: a part as long as the board gets the whole board, so the list is complete.
    • Excel and labels: download to Excel and print part labels on an A4 sheet.
    v1.00 (November 2026)
    • Volume right away: board feet and cubic meters, linear length, area, weight by species and cost by your yard's price list.
    • Shopping list: from finished parts I work out how many boards to buy and lay the parts out on them with kerf and end trim.
    • Lumber by volume: rough thickness per NHLA rules (13/16″ from 4/4) or with your own planing allowance.
    Have a suggestion or found a bug?
    +

    Related calculators

    Work this out too

    What I use for this

    The tools I use for this in my own workshop.

    All my tools →

    When you buy through a link, you support the development of CalcWood. It costs you nothing extra.

    Plans to build it yourself

    Build it yourself. With plans where every part is dimensioned.

    New 3D model PDF in English 44 A4 sheets

    Multifunction workbench

    One rolling bench for your table saw, router and assembly work. The saw sits flush with the top, so you get a big flat surface around the blade, and the whole bench rolls wherever you need it.

    • Fits 5 table saws: Bosch, Metabo, DeWalt, Festool, HiKOKI
    • 2 versions: with saw and router, or without machines
    • Material list and sheet cutting plan, so you buy only what you need
    • Dust collection for saw and router hidden in the walls, plug the vacuum in from outside
    • 10 drawers, adjustable shelf under the saw
    • Step-by-step build
    Price BLACK FRIDAY −30%$36.90 $25.83
    See the plans →